Showing 1–10 of 37 results
-
Features:
- UV resistance
- Fast installation
- Excellent elongation properties
- 10-20 minute shave time with a long open shaving window.
- Durable
- Cures in temperatures as low as -20°F (-29°C)
- Variety of colors available
- Suitable for use in USDA inspected facilities.
Description:
A UV resistant, 100% solids, two component, heavy duty, semi-rigid polyurea joint sealant designed for filling and protecting control joints and saw cut construction joints in industrial and commercial floors. Developed to fill typical construction joints in order to protect joint edges from spalling and to seal open joints. Using Carboseal Flex Joint will create a longer lasting floor and reduce the areas where bacteria can hide and grow. It has the unique benefit of being able to be shaved within minutes or up to 24 hours later.
-
Features:
- Meets all VOC Requirements
- Low Odor/Solvent Free Compliant
- USDA compliant
- Stain Resistant with good cleanability
- Can be seeded for anti-skid surface
- Can Saturate Fiberglass Reinforcement for Better Crack Bridging Properties
Description:
A multi-functional semi-self leveling epoxy floor topping. Polymer Alloy 2000 uses a moisture-tolerant primer and a flexible semi-self-leveling epoxy topcoat to achieve a strongly bonded monolithic topping with moderate chemical resistance to splash and spillage, and good physical and mechanical properties.
-
Features:
- Dissipative in the range of 1 x 106 to 109 ohms
- Meets all VOC requirements
- Low odor/Solvent-free compliant
- USDA compliant
- Stain-resistant with good cleanability
- Can be broadcast into for non-skid surface (conductive aggregate only)
Description:
A static dissipative, semi self-leveling novolac epoxy floor topping engineered to instill electrostatic control characteristics. This product uses a moisture-tolerant primer to achieve a strongly bonded monolithic topping with moderate chemical resistance to splash and spillage, and good physical and mechanical properties.
-
Features:
Description:
Primer 27C is a two-component conductive vinyl ester primer designed to be used over concrete whenever the coating or lining system must be spark tested for pinholes.
-
Features:
- Tolerant to moisture vapor transmission
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids epoxy primer for steel and concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.
-
Features:
- Tolerant to moisture vapor transmission
- Densifies concrete surface
- Low VOC
- Low Odor
- Meets SCAQMD Rule 1113 for VOC content
- VOC Compliant with LEED 4.1
Description:
A low VOC, deep penetrating epoxy primer for dense concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. Can be used to densify the surface of concrete.
-
Features:
- Tolerant to moisture vapor transmission
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids conductive epoxy primer for concrete, used in place of traditional primers when the coating or lining system must be holiday tested. It is also used as part of conductive flooring systems, intended to dissipate stray electrical current by running excess current to ground. In both uses, it increases adhesion and reduces the potential for outgassing on concrete substrates.
-
Features:
- Tolerant to moisture vapor transmission
- Low VOC
- Low Odor
- Meets SCAQMD Rule 1113 for VOC content
- VOC Compliant with LEED 4.1
Description:
A low VOC epoxy primer for concrete and steel. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.
-
Features:
- Tolerant to moisture vapor transmission
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids static dissipative epoxy primer for concrete. It is used as part of static dissipative flooring system, intended to dissipate stray electrical current by running excess current to ground. It increases adhesion and reduces the potential for outgassing on concrete substrates.
-
Features:
- Complies with Greenbook
- Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
- Cold temperature cure
- Fast cure and walk on time
- Excellent barrier properties
- low permeability
- Single-coat application 20 to 125 mils
- Bridges normal shrinkage cracks in concrete
- Monolithic
- protective film for protection of steel and concrete
- Outstanding abrasion
- impact and tear resistance
- Commonly used for Waffle Decks
- where it can be cut away when needed.
Description:
Plural-component applied coating used as a lining in the technology manufacturing facilities to protect the substrate from traffic and moderate chemical exposure. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.