Showing 1–10 of 16 results
-
Features:
- Meets all VOC Requirements
- Low Odor/Solvent Free Compliant
- USDA compliant
- Stain Resistant with good cleanability
- Can be seeded for anti-skid surface
- Can Saturate Fiberglass Reinforcement for Better Crack Bridging Properties
Description:
A multi-functional semi-self leveling epoxy floor topping. Polymer Alloy 2000 uses a moisture-tolerant primer and a flexible semi-self-leveling epoxy topcoat to achieve a strongly bonded monolithic topping with moderate chemical resistance to splash and spillage, and good physical and mechanical properties.
-
Features:
- Meets all VOC requirements
- Conductive
- Low odor
- Semi-self leveling to a high gloss finish at 20 mils
- Stain resistant with good cleanability
- Conductive anti-skid available
Description:
A 100% solids, multi-functional semi-self leveling epoxy floor topping. Polymer Alloy 2000C uses a moisture-tolerant conductive primer and a flexible conductive semi-self leveling topcoat to achieve a strongly bonded flooring system with moderate chemical resistance, good physical and mechanical properties and static discharge properties.
-
Features:
- Industry standard for low cured emissions
- Meets all VOC Requirements
- Low Odor/Solvent Free Compliant
- USDA Compliant
- Semi-Self Leveling
- Stain Resistant with Good Cleanability
- Can be Seeded for Anti-Skid Surface
- Can Saturate Fiberglass Reinforcement for Better Crack Bridging Properties
Description:
Polymer Alloy 2000LE is a flexible, semi-self leveling, 100% solids epoxy floor topping with industry-leading low emissions testing. It is strongly bonded monolithic coating with moderate chemical resistance and good physical and mechanical properties. This product develops a cured strength 2-3 times that of the concrete base to which it is applied to provide exceptional durability and prolong the life of the substrate.
-
Features:
- Dissipative in the range of 1 x 106 to 109 ohms
- Meets all VOC requirements
- Low odor/Solvent-free compliant
- USDA compliant
- Stain-resistant with good cleanability
- Can be broadcast into for non-skid surface (conductive aggregate only)
Description:
A static dissipative, semi self-leveling novolac epoxy floor topping engineered to instill electrostatic control characteristics. This product uses a moisture-tolerant primer to achieve a strongly bonded monolithic topping with moderate chemical resistance to splash and spillage, and good physical and mechanical properties.
-
Features:
- Can minimize outgassing on concrete
- Promotes higher adhesion values between the substrate and lining material
- Low viscosity promotes increased wet out of surface
- Long pot life
- Long recoat window (5 days @ 75°F/23°C)
- Primer for polyester and vinyl ester systems
Description:
A primer designed to provide improved adhesion when installing high performance linings over properly prepared concrete and steel. It lowers the chances of outgassing when used over concrete and can be used as a holding primer for abrasive blasted steel.
-
Features:
Description:
Primer 27C is a two-component conductive vinyl ester primer designed to be used over concrete whenever the coating or lining system must be spark tested for pinholes.
-
Features:
- Tolerant to moisture vapor transmission
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids epoxy primer for steel and concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.
-
Features:
- Tolerant to moisture vapor transmission
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids conductive epoxy primer for concrete, used in place of traditional primers when the coating or lining system must be holiday tested. It is also used as part of conductive flooring systems, intended to dissipate stray electrical current by running excess current to ground. In both uses, it increases adhesion and reduces the potential for outgassing on concrete substrates.
-
Features:
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Excellent abrasion resistance and hardness
- FDA compliant
- Low permeability
Description:
A thermosetting vinyl ester coating which utilizes flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions. It offers the most versatile protection in the Protecto-Coat line.
-
Features:
- Excellent resistance to fluorinated chemicals
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Excellent abrasion resistance and hardness
- FDA compliant
- Low permeability
Description:
A vinyl ester resin formulated specifically as a silica free lining and utilizes graphite flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions.