Showing 31–36 of 36 results
-
Features:
- USDA compliant
- Fast recoat time
- Low odor
- Anti-microbial agents are available as an option
- Installed as supplied
- is compliant with California SCAQMD Rule 1113 for VOC content
- Contributes toward satisfying credit MR 5 and EQ 4.2 under LEED
Description:
An epoxy grout used to seal and fill small voids left from troweling the aggregate filled Steri-Flor T, a heavy-duty industrial troweled mortar.
-
Features:
- Meets SCAQMD Rule 1113 for VOC content
- Low viscosity - good wetting properties
- Approximately 500 cps mixed
- Low installation odor
- for use in occupied areas.
- Stain resistance with excellent cleanability
- USDA compliant
Description:
Steri-Flor UV is a multi-functional epoxy floor coating with increased UV stability compared to conventional epoxies. It provides good resistance to common chemicals and daily traffic and may be used as a base/color coat, receiving coat, or grout coat for decorative broadcast floors.
-
Features:
- Meets most VOC Requirements
- Low Odor
- User Friendly
- Tolerant to moisture vapor transmission
Description:
A high solids epoxy primer for concrete. Designed to increase adhesion and reduce the potential for outgassing in high performance flooring or containment systems.
-
Features:
- Meets most VOC Requirements
- Low Odor
- User Friendly
- Increases adhesion to oil saturated concrete that has been surface cleaned
- Tolerant to moisture vapor transmission
Description:
A high solids epoxy primer for concrete that has previously been exposed to oils, grease, or fats. Specially designed to increase adhesion and reduce the potential for outgassing in high performance flooring or containment systems.
-
Features:
- Extremely fast recoatability
- Meets even the most restrictive VOC Requirements
- Low/no Odor
- User Friendly
- Unlimited moisture vapor transmission when used within a water-based system
- Can be used if the substrate is saturated surface damp or "SSD"
- Suitable for use in USDA inspected facilities
Description:
A water based epoxy primer for concrete. Designed to increase adhesion and reduce the potential for outgassing in high performance flooring systems.
-
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. Compliance Certificates Available Upon Request
- Meets SCAQMD Rule 1113 for VOC content
- Water/Vapor Proofing
- Fast Setting
- VOC Compliant
- Reduces water from 10 lbs./1000 ft² to < 3lbs
- Allows for over coating with epoxies & other polymers
- Non-porous
- Bonds to concrete pH 7-14
- Semi-Self leveling
Description:
An aggregate filled polyurethane moisture control system that develops cure strength approximately 2 times that of the concrete base to which it is applied. The monolithic topping exhibits excellent physical and mechanical strength as well as moisture vapor reduction.