Showing 11–20 of 31 results
-
Features:
- Tolerant to moisture vapor transmission
- Densifies concrete surface
- Low VOC
- Low Odor
- Meets SCAQMD Rule 1113 for VOC content
- VOC Compliant with LEED 4.1
Description:
A low VOC, deep penetrating epoxy primer for dense concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. Can be used to densify the surface of concrete.
-
Features:
- Broad spectrum chemical resistance
- Superior adhesion to metal substrates and concrete
- Blush resistant formulation
- Meets all VOC Requirements
- Can be seeded with Sand or Aluminum Oxide for Anti-Skid
Description:
Protecto-Coat 100XT is a 100% solids, flake-filled, high functionality, novolac epoxy coating. The novolac epoxy binder and overlapping flake fillers in Protecto-Coat 100XT provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.
-
Features:
- Broad spectrum chemical resistance
- Superior adhesion to metal substrates and concrete
- Blush resistant formulation
- Meets all VOC Requirements
- Can be seeded with Sand or Aluminum Oxide for Anti-Skid
Description:
A high-performance, 100% solids, low odor, environmentally safe novolac epoxy coating. Protecto-Coat 105XT uses a moisture-tolerant primer and two coats of graphite flake-filled novolac epoxy resin to protect concrete and metal substrates. The novolac epoxy binder and overlapping flake filler provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.
-
Features:
- Meets all VOC Requirements
- 100% Solids
- Can be seeded with Sand or Aluminum Oxide for Anti-Skid.
Description:
A 100% solids, flake-filled epoxy resin to protect concrete and metal substrates. The epoxy binder and overlapping flake fillers provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.
-
Features:
- Complies with Greenbook
- Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
- Cold temperature cure
- Fast cure and walk on time
- Excellent barrier properties
- low permeability
- Single-coat application 20 to 125 mils
- Bridges normal shrinkage cracks in concrete
- Monolithic
- protective film for protection of steel and concrete
- Outstanding abrasion
- impact and tear resistance
- Commonly used for Waffle Decks
- where it can be cut away when needed.
Description:
Plural-component applied coating used as a lining in the technology manufacturing facilities to protect the substrate from traffic and moderate chemical exposure. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.
-
Features:
- Excellent overall chemical resistance
- Easily applied by spray
- Acceptable for use over stainless steel
- Excellent barrier protection
Description:
A self-priming amine-cured, epoxy phenolic, glass flake-filled coating designed for use in highly corrosive environments where abrasion and chemical resistance is required. This product also exhibits excellent heat resistance.
-
Features:
- Low Odor
- VOC Compliant
- Can be used for Coving
- Pitch and Curb Construction
- 100% Solids
Description:
A heavy duty novolac epoxy mortar used for high-impact protection and slope to drain in chemical processing areas.
-
Features:
- Bridges surface cracks up to 100 mils in concrete
- Flexibilized system
- Can be broadcast into for increased abrasion resistance and anti-slip properties
- Chemical Resistant
- Water Resistant
- Meets all stringent VOC requirements
Description:
A flexibilized epoxy resin that, when mixed with silica filler, will reduce the coefficient of expansion and provide a thixotropic base on which to embed fabric reinforcement. The added flexibility provides strength when bridging small surface cracks and increases resistance to thermal shock.
-
Features:
- Meets all VOC Requirements
- Low Odor
- Conductive Version Available
Description:
Protecto-Line 100 uses several layers of amine cured, reinforced epoxy resin to build up the protection that metal and concrete need in chemical manufacturing or processing operations. When fully cured, the separate elements lose their individual identity and become a single, monolithic lining.
-
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets SCAQMD Rule 1113 for VOC content
- Vertical and overhead applications
- Low odor
- Meets all VOC requirements
Description:
An epoxy based patching compound for filling surface defects and bugholes in concrete substrates. This product uses an epoxy resin and a unique, inert mineral filler to achieve a smooth non-slumping fill material. The system is formulated to improve the integrity and continuity of a prepared substrate, prior to the application of a coating or lining system.