Showing all 8 results
-
Features:
- Tolerant to moisture vapor transmission
- Low VOC
- Low Odor
- Meets SCAQMD Rule 1113 for VOC content
- VOC Compliant with LEED 4.1
Description:
A low VOC epoxy primer for concrete and steel. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.
-
Features:
- Meets all VOC Requirements
- High strength and high abrasion resistance
- Low odor
- Excellent solvent resistance
- including methylene chloride and ethylene dichloride
Description:
A 100% solids, reinforced, premium epoxy coating for use as an internal tank lining. This product utilizes a hybrid curing agent to form a highly functional, densely cross-linked monolithic film. It is resistant to extremely corrosive solvents.
-
Features:
- Meets all VOC Requirements
- 100% Solids
- Can be seeded with Sand or Aluminum Oxide for Anti-Skid.
Description:
A 100% solids, flake-filled epoxy resin to protect concrete and metal substrates. The epoxy binder and overlapping flake fillers provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.
-
Features:
- Superior abrasion resistance and hardness
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Low coefficient of friction
- FDA compliant
- Low permeability
Description:
A thermosetting vinyl ester coating which utilizes flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions. It is formulated for higher abrasion resistance than standard Protecto-Coat 800.
-
Features:
- High temperature resistance
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Low coefficient of friction
- FDA compliant
- Low permeability
Description:
A thermosetting vinyl ester coating which utilizes flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions. It is formulated for a higher wet immersion temperature resistance than standard Protecto-Coat 800.
-
Features:
- Excellent overall chemical resistance
- Easily applied by spray
- Acceptable for use over stainless steel
- Excellent barrier protection
Description:
A self-priming amine-cured, epoxy phenolic, glass flake-filled coating designed for use in highly corrosive environments where abrasion and chemical resistance is required. This product also exhibits excellent heat resistance.
-
Features:
- Resistance to vibration
- impact
- shock
- and thermal cycling
- May be used to repair polyurethane linings
- Flexible
- Chemical Resistant
- VOC Compliant
Description:
A two-component, high solids, elastomeric, chemically resistant polysulfide coating.
-
Features:
- Superior chemical resistance
- Excellent abrasion resistance
- FDA Compliant
- Very Low Permeability
Description:
A high molecular weight novolac vinyl ester resin based lining also filled with large diameter glass flakes which provides exceptionally low permeability. It is used in high temperature and high abrasion environments.